The Gold Rate Today.
Home › Blog › Gold Making Charges Explained — Rates by Jeweller Type

Gold Making Charges Explained — Rates by Jeweller Type

TG By The Gold Rate Today Editorial· Updated 2026-09-21·7 min read

Key takeaways

Gold making charges are the fee a jeweller adds over the metal price for crafting an ornament — billed either as a percentage of the gold value (typically 8–25% as of 2026) or as a flat rupee amount per gram (roughly ₹200–₹800/g). They vary by jeweller type and ornament complexity, attract GST, are never recovered on resale, and are the one line on the bill you can genuinely negotiate.

What gold making charges actually pay for

A gold ornament's invoice has four components: the metal (weight × that day's rate for its purity), the making charge, any stone/other-material value, and GST. The making charge covers labour (karigar wages), design and dies, machine time, finishing and polishing, showroom overheads and the brand's margin. Two billing methods dominate:

Ask every jeweller "percentage or per-gram, and what number?" before discussing designs — converting both quotes to rupees on your target piece is the only honest comparison. Some bills instead show "VA" (value addition), which bundles making and old-style "wastage" into one percentage; treat VA exactly as a making charge.

Typical making charges by jeweller type — 2026 ranges

Seller typeTypical making charge (as of 2026)Notes
National branded chains (Tanishq, Kalyan, Malabar class)8–25% of gold valueFixed-ish rate cards; frequent festival discounts on making
Regional/local family jewellers6–15%, or ₹200–500/gMost negotiable segment; relationship pricing real
Online jewellery platforms5–14%Transparent listings; watch delivery insurance
Banks (coins only)8–16% premium over metalHighest coin premiums and no buy-back — generally avoid
Jeweller coins/bars2–8% premiumCheapest physical route for investment gold

Making charges by ornament type

Complexity of work, not weight, drives the rate. Indicative bands as of 2026:

OrnamentTypical making chargeWhy
Machine-made chains6–12%Automated, high volume
Plain bangles/rings8–14%Semi-machine work
Stone-studded/CZ pieces12–20%Setting labour; also check stone weight isn't billed as gold
Handcrafted necklaces15–22%Karigar hours dominate
Antique/temple/jadau/kundan18–30%+Specialist craft, low volume
Bridal sets15–25%Complexity + season pricing
Coins/bars2–8%Minimal fabrication

Investment corollary: the more beautiful the work, the worse the investment — a 25%-making bridal set must see gold rise 25% just to break even on melt value. If your goal is wealth storage, buy low-making forms and track the metal itself on our 24 carat gold rate page.

GST on making charges — how the bill is computed

When jewellery is sold as a finished article, GST of 3% applies on the total value including making (a separate 5% job-work rate applies only when you supply your own gold to a karigar for fabrication). A correct bill, worked end-to-end for a 20g, 22K necklace at an assumed ₹7,400/g 22K rate with 14% making:

Rates above are illustrative; use the live rate the day you buy. Every element of this bill — rate, weight, purity, HUID, making, GST — should appear as separate lines; generate a model invoice with our gold bill generator and match the jeweller's bill against it. CBIC's GST rate schedule is the authoritative tax source (cbic-gst.gov.in); rules are as stated as of 2026 and can change.

How to negotiate making charges (it works)

Making charges and resale: the exit math

When you sell or exchange, you are paid for metal only — weight × purity × that day's rate, minus the buyer's deductions. The making charge, GST, and any stone value billed as gold vanish. This is also why old-gold exchange at the same jeweller (where deductions are often waived during offers) usually beats outright selling to a new shop, and why keeping the original HUID invoice materially improves your exit price. The full seller-side arithmetic — melting deductions, purity re-testing, exchange versus sale — is its own topic, and if you're weighing jewellery against non-physical routes entirely, compare premiums and spreads on our digital gold and sovereign gold bond pages before your next purchase. Rule of thumb to carry into any showroom: every rupee of making charge is a rupee bet on enjoying the piece, not on gold. Pay it happily for jewellery you'll wear for a decade; refuse it for gold you're buying as money.

Why making charges vary so widely — the economics behind the quote

Understanding the jeweller's cost structure turns you from a price-taker into a negotiator. A branded showroom's making charge funds four layers: the actual karigar labour (often a fifth or less of what you pay), design and inventory carrying cost (hundreds of display pieces financed at commercial rates), retail overheads (mall rents, staff, security, advertising), and brand margin. A traditional family jeweller strips out most of layers two and three, which is precisely why their per-gram quotes undercut showrooms by a third or more for comparable machine-made pieces — and why the showroom's "50% off making" festival banner can still land above the family shop's everyday rate. Manufacturing route matters just as much: casting (wax-mould production runs) is the cheapest per piece and dominates the 6-12% band; machine-chain lines are cheaper still at volume; handcrafting, stone-setting and specialist traditions like jadau are genuinely labour-priced, with a single elaborate necklace absorbing weeks of a master karigar's time. This is also why identical-looking pieces quote differently — one is cast, the other handmade, and only the handled weight and finishing reveal it. Regional patterns add another layer: South Indian markets, with their intense daily-wear gold culture, run structurally thinner making margins on plain jewellery than North Indian metros, and wedding-season months tighten karigar availability and stiffen quotes everywhere. None of this is trickery; it is a cost stack you are allowed to interrogate. Ask what route made the piece, and the number on the tag starts moving.

A buyer's framework: deciding how much making charge is worth paying

The rational ceiling on making charges depends entirely on the piece's job in your life, so run every purchase through three questions. How long will it be worn? A daily-wear chain amortises a 10% making charge across a decade of use — trivially good value; a heavy occasion set worn thrice before tastes change amortises terribly, which argues for either lower-making designs or deliberately buying such pieces during genuine offer windows. What is the exit plan? Gold bought partly as family reserve should cluster in the 2-8% band (coins, bars, plain heavy bangles that exchange near metal value); gold bought as adornment can justify 15-20% for craftsmanship you will actually enjoy. What is the total premium over metal? Sum making, GST and any stone deductions and express it as a percentage over that day's rate for the fine-gold content — our rate calculator gives you the metal value in seconds. Under 10% total premium: efficient purchase. Ten to twenty: paying for design, fine if worn. Above twenty: you are buying art, and should consciously decide to. Two final habits complete the framework: always get the making method and charge written on the invoice (it anchors any future exchange negotiation at the same shop), and re-check the metal value of your existing jewellery once a year against the live rate on our 24 carat page — families that know what their gold is worth negotiate every subsequent purchase, exchange and loan from strength. Figures throughout are indicative as of 2026; making-charge bands drift with labour costs and competition, so treat the tables as negotiation baselines rather than fixed truths.

Carry one number into every showroom: the day's fine-gold value of the piece you're considering. Everything the jeweller adds above it — making, wastage, GST — is the conversation, and the buyer who opens with that number has already won half of it. Gold rewards patience twice: once in the market, and once at the making-charges line of the bill.

Frequently asked questions

What is a normal making charge for gold jewellery in India?

As of 2026, roughly 8–25% of the gold value at branded chains and 6–15% (or ₹200–500 per gram) at local jewellers. Machine-made chains sit at the bottom of the range; handcrafted, antique and bridal work at the top.

Is GST charged on making charges?

Yes. Jewellery sold as a finished article attracts 3% GST on the full value including making charges. A separate 5% job-work rate applies only when you supply your own gold to a goldsmith for fabrication. Rules as of 2026 — verify current rates at purchase.

Percentage or per-gram making charges — which is better?

Per-gram is easier to compare and doesn't inflate when gold rates rise; percentage scales with the metal value. Neither is inherently cheaper — convert both quotes to rupees on your specific piece and compare the final per-gram cost of fine gold.

Can making charges be negotiated?

Yes — they're the only negotiable line on the bill. Reductions of 20–40% are routinely achievable using competitor quotes, festival offers and purchase size. Ensure the jeweller doesn't compensate by padding the gold rate above the day's market price.

Do I get making charges back when I sell gold jewellery?

No. Resale pays for metal weight and purity only; making charges, GST and any stone value are fully lost. That's why coins and bars (2–8% premium) beat jewellery (8–25% making) for pure investment buying.

Check today's live gold rate in your city.

Gold rate today

Written and reviewed by the The Gold Rate Today editorial team. Facts checked against primary sources; see the reference above.

← All articles